The C24 bank family provides remote power supply for emergency, signal and beacon lights at 24 Vdc.
Via led surface
These are smart battery banks that alert as to possible anomalies, both within themselves and on any of the four lines where the emergency, signal or beacon lighting equipment is connected.
In addition to verifications in real time, the C24 banks perform operational and autonomy tests periodically according to selected settings.
The C24 banks may be integrated into a smart lighting project, and then remotely controlled from a computer or C-NB PLUS bank.
It is also possible to decide the status of each one of the bank's four outputs. In non-permanent mode (lights only one if there is a failure in electrical supply) or in permanent mode (lights on both when network is present and when absent).
The C24 system controls the light status LED that are connected to each one of the four outputs:
STATUS LED CONTROL
Ideal for premises where the status LED may be bothersome (hotel rooms or hospitals).
According to the number of pieces of equipment connected and the batteries used, the bank may deliver 1, 3 or 8 hours of autonomy (adjustable at the bank itself).
See the following table.
Covers a fire sector
Within the C24 family, there are two battery banks, according to the power supplied.
|Batteries||2 x 12 V · 7 Ah||2 x 12 V · 9 Ah||2 x 12 V · 12 Ah||2 x 12 V · 18 Ah||2 x 12 V · 24 Ah|
|Autonomy||1 h||3 h||8 h||1 h||3 h||8 h||1 h||3 h||8 h||1 h||3 h||8 h||1 h||3 h||8 h|
|Total output power (w)||88 W||36 W||14 W||115 W||48 W||19 W||154 W||36 W||27 W||234 W||105 W||42 W||314 W||136 W||58 W|
|Maximum current (a)||3.86||1.70||0.76||4.97||2.19||0.97||6.62||2.92||1.30||9.94||4.39||1.95||13.25||5.85||2.60|
|Phase monitor input||Yes||Yes|
|Floating power contacts||Yes||Yes|
|Power supply indicator per battery||Yes||Yes|
|Network power supply indicator||Yes||Yes|
|Battery power supply indicator||Yes||Yes|
|Breakdown alarm indicator||Yes||Yes|
|Complete discharge indicator||Yes||Yes|
|Active output indicator||Yes||Yes|
|Cable size||Maximum intensity||Distance*|
|1.5 mm2||1A||147 m|
|2.5 mm2||1A||245 m|
* Distances for double conductor wires, and charging cable at the end of the line